Mistral: MISTRAL ADVENTURIST AIR 13’2 x 30” x 6” (400cm x 76cm x 15cm) x 360L INFLATABLE SUP BOARDThe Adventurist Air, is our work horse touring board for those who need to load up and hit the inland waters or coastal waters in search of connecting with nature and getting away from the rat race. Paddles fast and smooth even with the large volume. Oversized front and rear cargo nets can carry up to 60kg of supplies and accessories made possible by the 400L volume. An 8mm deck thread permits addition of a windsurfing rig and a centre middle US box, means you can improve your upwind performance. Side mounted grab handles, nose and rear, means you can grab your board from any angle. A bow scuff pad protects from shoreline or object impacts. The graphics reflect the inland waterway hues and the EVA deck padding gives super non-slip grip and comfort under the feet. Incorporates advanced DSFL material. See Product Composition and Construction. COLOUR: Yellow, green and brown upper deck, white underbelly.PRODUCT BENEFITSDouble Skin Fusion Layer Drop StitchGenuine 13,000 threads per inch2,600 more threads than conventionalOversized front and rear mounted cargo elasticsUniversal fin box for universal finsUniversal fin box centre and middle for windsurfing8mm deck thread for windsurfing rigEVA diamond pattern non-slip padBow protectorTowing D-Ring front and rearCarry handleSide mounted grab handlesBow handleTail handleRobust constructionRepair kit suppliedDual action pumpFin includedWheeled travel bagRepair kit includes: PVC patches, PVC contact glue, valve spanner.TECHNICAL INFORMATION YOU ARE A NOVICE TO ADVANCED PADDLERThe Mistral Adventurist Air 13’2 x 30” (400cm x 76cm) x 360L inflatable SUP offers smooth, fast speed combined with epic stability and suits novice to advanced paddlers. Can easily support riders greater than 100kg and can support an additional 60kg in cargo.PRODUCT COMPOSITION and CONSTRUCTIONDouble Skin Fusion Layer (DSFL) Technology Drop Stitch Fabric. Uses 13,600 stitches per inch over the usual 12,000 making the board stiffer for no added weight gain. SUP board consists of polyvinyl chloride (PVC) woven polyester drop stitch construction, incorporating 13,600 polyester threads per inch. Non-slip material is composed of ethylene-vinyl acetate (EVA) foam. Contact adhesive consisting of poly-chloroprene polymers. Elastic bungee cord composed of both natural and manufactured rubber, poly carbonate fin-box, stainless steel retainers. STOCK ADVICEAvoid storing in direct high UV sunlight to prolong material longevity. Rinse with fresh water to evacuate all salt crystals. When dry, store in dry, well ventilated place avoid humid heat sources. TESTSDeveloped and tested by our design team in Holland and the UK. Components have been tested to ensure they meet nominal expectations of performance within reasonable expectations of form, function and budget. MAINTENANCESUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.Rinse salt water from board after use with freshTowel or air dry before stowageDo not drag over rough surfacesStore out of strong UVDo not store in a humid placeAvoid sand falling into the valveDo not over inflateInflate within (-) 2 psi of recommendationDo not store fully inflatedReduce to 5psi if storing inflatedDo not store when wetFold neatly avoiding fin boxAFTER WINTER STORAGEIf you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.Inflate to recommended PSIIf stored deflated check fold lines are OKMake a close inspection of the seams for any leaksDo same with the valve and re-tighten using the valve spannerCheck fin box and fin fitmentCheck D-Ring connectionsCheck deck padCheck for any discolouration due to bacteriaWash and scrub board with cool soapy waterObserve for any ‘bubbling’ caused by leaksMake a note of PSI and leave for 48hrsCheck PSI and note any lose of pressureInvestigate any issues and address / fixFor minor none seam leak issues fix using repair kitSeam failure often requires professional inputConsider contacting inflatable boat repairers
Please note: Manufacturers can sometimes change the specification of the products from time to time.
with a £ 0.00 deposit.
The total charge for credit is £ 0.00.
Peddlers Cycles acts as a credit broker and not the lender and only offers credit products from Secure Trust Bank PLC trading as V12 Retail Finance. Peddlers Cycles is authorised and regulated by the Financial Conduct Authority. Credit provided subject to age and status. We may receive a commission if your application is successful, and the amount may vary depending on the product chosen and the amount of credit taken out.
Consumer credit services are only available to over 18s and subject to status.
Credit is provided by V12 Retail Finance Limited, a trading name of Secure Trust Bank Plc. which is registered in England and Wales: 541132. Registered Office: One Arleston Way, Solihull, B90 4LH. Secure Trust Bank Plc is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority with registration number 204550. For more information please visit www.v12retailfinance.com
If you are intending to use finance as your payment option, please note we will only ship your order to your billing address, and not to an alternative delivery address.
This is for estimation purposes only. Actual Finance Application is Completed During Checkout.