Mistral: MISTRAL TANGO 11’5 x 31” x 6” (348cm x 79cm x 15cm) x 311L INFLATABLE SUP BOARD COMBO SETA complete ready to Go-SUP package. Designed for versatility Diamond pattern EVA non slip deck, nose scuff pad and towing D-ring, rear D-Ring leash point and single universal fin box. The Tango paddles smooth and stable. Includes polycarbonate blade, carbon composite shaft, dual action pump, fin, coiled leash, repair kit and wheeled travel bag. Incorporates DSFL material providing some unique benefits. See Product Composition and Construction. COLOUR: White board, Mistral blue EVA pad, orange / blue graphics.PRODUCT BENEFITSDouble Skin Fusion Layer Drop StitchGenuine 13,000 threads per inch2,600 more threads than conventionalFront mounted cargo elasticsUniversal fin box for universal finsEVA diamond pattern non-slipBow protectorTowing D-RingCarry handleLeash ringRobust constructionRepair kit suppliedAdjustable PaddlePolycarbonate blade, carbon composite shaft.Dual action pumpFin includedCoiled leash includedWheeled travel bagRepair kit includes: PVC patches, PVC contact glue, valve spanner. TECHNICAL INFORMATION YOU ARE A NOVICE TO INTERMEDIATE PADDLERThe Mistral Tango 11’5 x 33” x 6” (348cm x 79cm x 15cm) x 311L inflatable SUP offers smooth paddling and stability and suits novice to intermediate paddlers. With 311L the Tango can support riders up to 120kg, but optimally sub 100kg for better performance.PRODUCT COMPOSITION and CONSTRUCTIONDouble Skin Fusion Layer (DSFL) Technology Drop Stitch Fabric. Uses 13,600 stitches per inch over the usual 12,000 making the board stiffer for no added weight gain. SUP board consists of polyvinyl chloride (PVC) woven polyester drop stitch construction. Non-slip material is composed of ethylene-vinyl acetate (EVA) foam. Contact adhesive consisting of poly-chloroprene polymers. Elastic bungee cord composed of both natural and manufactured rubber, poly carbonate fin-box, stainless steel retainers.  STOCK ADVICEAvoid storing in direct high UV sunlight to prolong material longevity. Rinse with fresh water to evacuate all salt crystals. When dry, store in dry, well ventilated place avoid humid heat sources.TESTSDeveloped and tested by our design team in Holland and the UK. Components have been tested to ensure they meet nominal expectations of performance within reasonable expectations of form, function and budget. MAINTENANCESUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.Rinse salt water from board after use with freshTowel or air dry before stowageDo not drag over rough surfacesStore out of strong UVDo not store in a humid placeAvoid sand falling into the valveDo not over inflateInflate within (-) 2 psi of recommendationDo not store fully inflatedReduce to 5psi if storing inflatedDo not store when wetFold neatly avoiding fin boxAFTER WINTER STORAGEIf you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.Inflate to recommended PSIIf stored deflated check fold lines are OKMake a close inspection of the seams for any leaksDo same with the valve and re-tighten using the valve spannerCheck fin box and fin fitmentCheck D-Ring connectionsCheck deck padCheck for any discolouration due to bacteriaWash and scrub board with cool soapy waterObserve for any ‘bubbling’ caused by leaksMake a note of PSI and leave for 48hrsCheck PSI and note any lose of pressureInvestigate any issues and address / fixFor minor none seam leak issues fix using repair kitSeam failure often requires professional inputConsider contacting inflatable boat repairers